Epiphan VGADVI Recorder - Manual (Page 51)

VGADVI Recorder User Guide 2-1 Identify sources
2-1
Identify sources
A source can be an image, video, or audio from a camera, a computer screen or any device that provides a VGA,
DVI, HDMI, S-Video and audio signal output. Prior to powering up the VGADVI Recorder connect the input
sources to the following input ports on the device:
Table 15 Cable and port connections
Cable Input Port
connect VGA, HDMI or DVl (dual or single link,
depending on your device)
DVI port
connect composite or S-video source S-Video port
connect audio Audio Input port
The web interface automatically discovers all input sources and displays them in the Stream Setup section of
the web admin interface.
When a source is connected, the system automatically detects and adjusts the image capture settings at start
up and continues to adjust every 60 seconds during operation (interval is configurable). The system’s goal is to
produce the best quality captured image given the source equipment used. Generally no further configuration
is needed.
42