Set audio volume – Epiphan VGADVI Recorder User Manual
Page 55
VGADVI Recorder User Guide
2-3 Configure an audio source
3. From the web interface, scroll to the channel section and click the channel to which you want to
configure audio settings; the menu expands.
4. Click Stream Setup; the Stream setup configuration page opens.
5. Scroll to Audio settings.
6. Check Enable audio check box.
7. If the default audio format (PCM 22KHz) is not desired, click the Audio format drop-down menu to elect
Fine-tune channel configuration
for help choosing one of the supported audio
codecs.
8. Click on the Audio channels drop-down menu to choose mono (1 channel) or stereo (2 channels).
9. Click on the Audio bitrate drop-down menu to choose the audio transmission speed. Increasing this
value produces better sound quality but uses more system processing power and bandwidth.
10. Click Apply.
Set audio volume
To set audio volume (not this is done on the encoder, and not the VGA Grid):
1. Ensure an audio input source is connected to an audio input port.
2. Connect to the admin interface using your preferred connection method. See
.
3. Login as admin.
46