Daktronics AF-3700-34 RGB - Manual (Page 64)

Temperature Sensor Mounting For
Galaxy AF-3700 and AF-3500 Displays page 5 of 5
ED-16704 Rev 2
28 May 2010
201 Daktronics Drive PO Box 5128, Brookings, SD 57006-5128
tel: 866-343-3122 fax: 605-697-4700
www.daktronics.com
3. Remove the two screws holding the board to the
plastic disk. Install the new board and replace the
two screws.
4. Reconnect the cable to the temperature sensor
board, making sure all the wires make a good
electrical connection.
5. Route wires around the sensor board as shown in
Figure 9 and reassemble the sensor enclosure.
Figure 9: Temperature Sensor Wiring