Daktronics AF-3700-34 RGB - Manual (Page 30)

Start-up Procedure 24
5.2 Start-up Sequence
Each time the display is turned on, an initialization sequence will run. The information in the
second column will then be shown on the display.
Note: The Xs refer to numbers that may vary for each display, such as the hardware address.
Topic
Information shown
1. Product Name • Galaxy Pro
2. Display Size • Row x Column
3. Shading • 16.7M RGB
4. Bootloader Version • OS X.XX
5. Firmware Number • ED-16619
6. Firmware Revision • Rev X.X.X
7. Hardware Address • HW:XX
8. Software Address • SW:XX
9. IP Address: (Default) • IP: 172.16.192.25
10. Subnet Msk: (Default) • MSK: 255.255.0.0
11. Mac Address
• MAC:00:09:EC:02:04:06
12. COM1 Configuration • C1: V15 (modem: C1:V15 if a modem is present)
13. COM 2 Configuration • C2: DEBUG
14. Socket 3001:
• TCP 3001: V15
15. Line Frequency • CLK: AUTO (60)
16. Display Description • M3 Display
After this sequence is complete, the display will blank. A single pixel will flash in the lower
right corner of the display to show that the display has power, but no messages are currently
running.