Comtech EF Data LBC-4000 - Manual (Page 91)

A–1
Appendix A. UP/DOWNCONVERTER IDU
MODULE REMOVAL/RE-INSTALLATION
A.1 Introduction
This appendix illustrates the procedure required to remove and
re‐install an IDU for the LBC‐4000 Up/Down Converter System
into any LBC‐4000 chassis (Figure A‐1, shown with the top cover
removed for clarity). This procedure is typical for removing or
installing an IDU into the LBC‐4000’s applicable Conv A or Conv B
bay.
Figure A-1. LBC-4000 Chassis – IDU Module Bays