Comtech EF Data LBC-4000 - Manual (Page 71)

LBC-4000 L-Band Up/Down Converter System Revision 4
Front Panel Operation MN/LBC4000.IOM
5–15
Theme Name Screen Saver Activity Visual Description
S-Wiper Pass 1:
Pass 2:
This mode features two separate
‘marquee’ displays - the first reads,
“Comtech EF Data
LBC-4000”
The second ‘marquee’ reads,
“Screen-Saver Mode
Press Any Key”
The screens alternate, with
Marquee 1 performing a slow
reveal/wipe from left-to-right, and
then Marquee 2 performs a slow
reveal/wipe from right-to-left.
B-Board This mode features a ‘marquee’
display:
“Comtech EF Data
LBC-4000”
The display performs a ‘slow reveal’
from left to right, and then performs
a ‘slow wipe’, again from left to right.
Classic The top line of the display shows
the user-defined “Application ID”,
and the bottom line shows ‘Press
any key...’. The message
moves from right to left across the
screen, and then wraps around.
UTIL: ScrSaver Æ Time
The time lapse from normal VFD operation to screen saver mode may be adjusted – or disabled
outright. Set the timer to OFF to disable the screen saver feature, or use the [↑][↓] arrow keys to
select a time in minutes ranging from 001 to 999. Press [ENT] when done.
5.2.4.6 UTIL: FWinfo
Firmwares: BULK=FW9965X
M&C=FW9966X FPGA=FW9967X
Where ‘X’ is the revision letter, this display provides read‐only information about the LBC‐4000
internal firmware. The converter can store two complete firmware images, and you can select
which image will be loaded the next time the unit reboots.
Use the [←][→] arrow keys to select INFO or SELECT, and then press [ENT].
Comtech EF Data
LBC-4000
Screen-Saver Mode
Press Any Key
Comtech EF Data
LBC-4000
ser Application ID--
ress Any Key...