Comtech EF Data LBC-4000 - Manual (Page 31)

LBC-4000 L-Band Up/Down Converter System Revision 4
Installation MN-LBC4000A
2–5
Follow these steps to install the CEFD‐style chassis kit:
Step Task
1
Use the #10 flat washers, #10 split washers, and #10 hex nuts to secure the #10
shoulder screws to the CDM‐800 chassis through the rear right and left side mounting
slots.
2
Use the #10 rack bracket bolts to install the rear support brackets onto the rack
enclosure threaded rear mounting rails.
3
Mount the unit into the rack enclosure. Ensure that the shoulders of the #10 shoulder
screws properly engage into the rear support bracket slots.