Comtech EF Data MBT-4000 - Manual (Page 27)

3–1
Chapter 3. EXTERNAL
CONNECTORS
3.1 External Connectors Overview
As shown in Figure 3-1, connectors provided on the MBT4000 Multi-Band Transceiver System
provide all necessary external connections between the the transceiver and other equipment.
Note: This figure depicts an MBT-4000 configuration with (1) BUC-4000 Block Up Converter
Module and (1) BDC-4000 Block Down Converter Module installed.
Figure 3-1. MBT-4000 External Connectors
RF Side
IF Side
(Cable Loops removed for clarity)