Comtech EF Data MBT-4000 - Manual (Page 13)

MBT-4000 Multi-Band Transceiver System Revision 4
Preface MN/MBT4000.IOM
ix
Electromagnetic Compatibility (EMC) Compliance
This is a Class A product. In a domestic environment, it may cause radio interference that
requires the user to take adequate protection measures.
EN 55022 –1998 Compliance
This equipment meets the radio disturbance characteristic specifications for information
technology equipment as defined per EN 55022 1998.
EN 55082-1 – 1997 Compliance
This equipment meets the EMC/generic immunity standard as defined per EN 55082-1 1997.
Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used
in accordance with the instruction manual, it may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference; in which case, users are required to correct the interference at their own expense.
NOTE
To ensure compliance, properly shielded cables for DATA I/O shall be used.
More specifically, these cables shall be shielded from end to end, ensuring a
continuous shield.