5 vendor id package missing, Vendor id package missing – BECKHOFF ET1100 User Manual
Page 37
EtherCAT IP Core for Xilinx FPGAs
Slave Controller
– Application Note FAQ
33
5.2.5
Vendor ID package missing
If the vendor ID package is missing, the library unit ECAT_VENDOR cannot be found.
Messages
[…]
Entity
Entity
ERROR:
HDLParsers:3014 - "
C:/BECKHOFF/ethercat-
v2.04a/lib/EtherCAT_IPCore.vhd
" Line 13059. Library unit ECAT_VENDOR is not
available in library work.
-->
Total memory usage is 296892 kilobytes
Number of errors : 1 ( 0 filtered)
Number of warnings : 0 ( 0 filtered)
Number of infos : 0 ( 0 filtered)
Solution
Add the vendor ID package to the project. This happens if the vendor ID package was not added to
the IP Core installation during setup. Refer to the EtherCAT IP Core datasheet on adding the IP Core
vendor ID package and integrating it into the reference designs. Also check if the environment variable
for the IPCore_Config tool is set (datasheet). Regenerate EtherCAT IP Cores for the EDK with the
IPCore_Config tool to integrate the vendor ID package afterwards.