3 vendor id package is not in the project, Vendor id package is not in the project – BECKHOFF ET1100 User Manual
Page 25
EtherCAT IP Core for Altera FPGAs
Slave Controller
– Application Note FAQ
21
4.2.2.2
Vendor ID package is in the project, but not on the disk
Message
Warning: Can't analyze file -- file ethercat_digitalio/ETHERCAT_VENDORID.VHD is missing
Message window
Figure 7: Vendor ID package is missing
Solution
Regenerate EtherCAT IP Core, if the vendor ID package is correctly installed, it should be copied to
the project folder again.
4.2.2.3
Vendor ID package is not in the project
Message
Error (10481): VHDL Use Clause error at ETHERCAT_IPCORE.VHD(15906): design library "work"
does not contain primary unit "ECAT_VENDOR"
Message window
Figure 8: Vendor ID package is missing
Solution
Regenerate EtherCAT IP Core, if the vendor ID package is correctly installed, it should be copied to
the project folder again.