BECKHOFF ET1100 - Manual (Page 35)

EtherCAT IP Core for Xilinx FPGAs
Slave Controller – Application Note FAQ 31
5.2.3 No license found
This error occurs if either no valid license was found, or if the type of the license file (full, evaluation) is
not the same as the EtherCAT IP Core. The error message shows which license is required by the IP
Core (highlighted).
Messages
Analyzing hierarchy for entity in library (architecture ).
INFO:coreutil - No license for component found. You may use the
customization GUI for this component but you will not be able to generate any implementation
or simulation files.
For license installation help, please visit:
www.xilinx.com/ipcenter/ip_license/ip_licensing_help.htm
For ordering information, please refer to the product page for this component on:
www.xilinx.com FLEXlm Error: No such feature exists. (-5,21)
ERROR: Xst:1484 - A core is unlicensed !
-->
Total memory usage is 348576 kilobytes
Number of errors : 1 ( 0 filtered)
Number of warnings : 0 ( 0 filtered)
Number of infos : 1 ( 0 filtered)
Process "Synthesize - XST" failed
Figure 12: License Configuration Manager: No license available (expecting iptb_ethercat_...)
Solution
Install the required license according to the EtherCAT IP Core datasheet or re-install EtherCAT IP
Core if the wrong license type is used (full/evaluation).