2 implementation issues, 1 megawizard generation, Implementation issues – BECKHOFF ET1100 User Manual

Page 23: Megawizard generation

Text mode
Original mode

EtherCAT IP Core for Altera FPGAs

Slave Controller

– Application Note FAQ

4.2

Implementation issues

4.2.1

MegaWizard generation

Message

Error: Error (10481): VHDL Use Clause error at ETHERCAT_IPCORE.VHD(15906): design library
"work" does not contain primary unit "ECAT_VENDOR" File:
C:/altera/quartus101/ip/beckhoff/ethercat_2.4.0/lib/ETHERCAT_IPCORE.VHD Line: 15906

Message window

Figure 6: MegaWizard generation issue

Solution
If the vendor ID package is missing in the installation folder (e.g., because it was not installed/found
during installation), it has to be added manually to the installation folder. Refer to the EtherCAT IP
Core datasheet for instructions. Regenerate the EtherCAT IP Core afterwards.

This manual is related to the following products:

ET1200