Avery Dennison SS Finisher - Manual (Page 38)

Users Manual SS Finisher Appendix D •••• 38
Teach-in Procedure:
1. Turn the selector switch (Arrow) to the “Q1” setting.
2. Place the material under the light spot just before the sense mark.
3. Press and hold the “Teach” button.
4. Move the sense mark under the light spot.
5. Release the “Teach” button.
6. Turn the selector switch (Arrow) to the “RUN” position.
7. The “Q/ok” light will flash when the sense mark is moved under the light spot.
Q
1
R
U
N
R
U
N
D
E
L
A
Y
O
N
Q
/o
k
T e a c h
Notes:
The switching threshold is set in the middle between the received signals from
the background and the mark and is stored permanently. The optimal sender
light color is selected automatically.
If the teach-in procedure was not successful, the “Q/ok” light will flash
continuously.