Avery Dennison SS Finisher - Manual (Page 10)

Users Manual SS Finisher Operation •••• 10
Unit Specification
Label Size
Max: up to 1.57" (40mm) - (1 9/16” (40mm) Tested) web x up to 5" (127 mm) feed - cut and stacked
- Up to 10.0" (255mm) feed – Without stacking
Min: 5/8" (16mm) web x 1" (25.4mm) feed - See chart Appendix C
Justification Material must be centered over ultrasonic horn.
Sense Mark The material must have a pre-printed sense mark on the top side. The sense mark must be a minimum
of 1/8” (3.2mm) in the feed direction and ¼”(6.35mm) across the web. The sense mark must have
a clear space of at least 0.3” (7.6mm) just prior to the sense mark.
Speed Operator adjustable to match speed of printer
Stock Polyester woven edge fabric and AVERY DENNISON So-Soft® Products
Interface Cabling to printers and to Sonics
Control
Panel
Push-button SS Finisher functions with 2 Line x 24 Character International LCD Backlit Display
Dimensions 20.0" (508mm) high x 26" (660mm) wide x 15" (381mm) deep
Weight 114 Lbs. (52Kg.)
Electrical 90-132 / 180-265 VAC 50-60Hz 10/5 Amp - factory set
Temperature 41°F (5°C) to 104°F (40°C)
Humidity 5% to 90% non-condensing
Other
Features
- Life Counts
- Operator adjustable: cut position
- Error Detection of: guard open, full stacker
- Self Diagnostics
- Missed sense mark detection and correction
- Reflective Sensor (Top of Web Only)
Options - Flag cutting – (Same length as label only)
- Spare Parts Kit
- International Hardware Kit
The SS Finisher is a modular design, which can be added to any of the AVERY
DENNISON fabric printers - including the 636, 656 and 676 thermal transfer
printers.