Avery Dennison SS Finisher - Manual (Page 34)

Users Manual SS Finisher Appendix B •••• 34
Appendix B
Error Messages
When the SS Finisher detects an error condition, the display will show the last
error encountered. When the last error is removed – the display will show
previous errors – if they exist.
When the machine is first powered on, the front panel will display the following
screen;
D I A G N O S T I C T E S T 1
If the front panel display remains in this condition – it is indicating a failure to
communicate from the front panel to the motherboard. Check connections to the
motherboard.
When the machine has successfully completed initializing, the front panel will
display one of the following two screens;
C O U N T E R 9 9 9 9 9 9 R E A D Y
L E N : X X X M M C U T : X X X S P D :
OR
C O U N T E R 9 9 9 9 9 9 S T O P P E D
L E N : X X X M M C U T : X X X S P D :
If the length of the label is not set correctly or there is a problem with the feed
mechanism – the machine will not operate and the following error message will
be displayed;
A L I G N S T O C K
L E N : X X X M M C U T : X X X S P D :
If the guard door is open or if there is a faulty interlock switch – the machine will
not operate and the following message will be displayed;
C L O S E G U A R D
L E N : X X X M M C U T : X X X S P D :