Avery Dennison SNAP 656 - Manual (Page 30)

24B • •• • Control Panel Operation Users Manual Model 656/636
When the printer is powered up and all initializations are complete, if there aren’t any
Batches to print, the "HOME" screen will be "READY FOR BATCHES" and the
model and print head density.
When there are Batches to be printed, the "HOME" screen will be the
"BATCH ID QTY" screen. The Batch ID / Batch Qty screen displays the currently
cutting batch ID and labels remaining to be cut.
When the Batch Id/Qty screen is the home screen and the user presses the EXIT
button the Model and DPI are displayed briefly before the Batch Id/Qty screen is
displayed.
If the printer is performing a FEED or a TEST pattern, the screen will show
"FEEDING" or "PRINTING TEST PATTERN" respectively on line two, the top line
will be blank
F E E D I N G
P R I N T I N G T E S T P A T T E R N
Pressing the MODE/Down Arrow key will take the user to the various mode screens
listed below (refer to the Front Panel Mode Descriptions section in this manual).
Pressing the EXIT/Up Arrow key at any time will take the user back to the "HOME"
screen.
PRINTER ADJUSTMENTS
P R E S S E N T E R F O R
P R I N T / C U T P O S I T I O N S
PRINTHEAD ADJUSTMENTS
P R E S S E N T E R F O R
P R I N T H E A D S E T U P
CALIBRATE SENSORS
P R E S S E N T E R F O R
C A L I B R A T I N G S E N S O R S
LIFE COUNTS/VERSIONS
P R E S S E N T E R F O R
L I F E C O U N T S / V E R S I O N S