Avery Dennison SNAP 656 - Manual (Page 21)

Users Manual Model 656/636 Printer Operation • •• • 15B
Loading Stock
FIGURE 6 – Tag Stock Threading
FIGURE 6A – Fabric Threading
LOADING STOCK FOR THE FIRST TIME
1) Adjust the unwind width wider than the roll of stock to be loaded. Set the stock
roll on the unwind between the guides with the stock unwinding from the top
clockwise. Adjust the unwind width down to the stock size without clamping the
core.
2) Adjust the web guides on the decurler bar to a width wider than the stock.
3) Remove the tape or pull the glued end of the stock loose from the supply roll of
stock. Pull off about 2 feet (.5 m) of stock to thread it through the printer.
NOTE: If the end of the material was glued down, cut off all material that has glue
on any surface.