Avery Dennison SNAP 656 - Manual (Page 15)

Users Manual Model 656/636 Printer Setup • •• • 9B
P.C. Board Identification
Mother Bd. (371170) - Horizontal on bottom of printer
Front Panel Bd. (511108) - User interface system
Thermal Control Bd. (371105TT) - AT Slot 2
Head Driver Bd. (341106TT) - AT Slot 1
TCB Dip Switch Settings
DIP SWITCH # DEFINITION 636 656
8 DOWNSTACKER /
LOKPRINT
DOWNSTACKER ON
LOKPRINT ® OFF
DOWNSTACKER ON
LOKPRINT ® N/A
7 UNUSED OFF OFF
6 UNUSED OFF OFF
5 STACKER JAM ENABLE ON
DISABLE OFF
ENABLE ON
DISABLE OFF
4 MACHINE TYPE OFF OFF
3 MACHINE TYPE ON OFF
2 UNUSED OFF OFF
1 DPI 240 OFF
300 ON
240 OFF
300 ON
Installing the Power Cord
A power cord is shipped with each printer. The cord for 115-volt printers will use
the standard three-prong plug used in the U.S.A. A 230-volt printer and some other
115-volt configurations will have the plug end of the cable removed. It is the
customer’s responsibility to have the plug and alteration work done by a certified
electrician. AVERY DENNISON supplies printers to many countries with many
variations. Therefore we leave this to the customer to make the proper selection for
their country.