Avery Dennison ALS 350 - Manual (Page 68)

68
4 O
PERATION
4.4 S
ETTINGS IN THE EXTENDED MENU
ALS
350
450
4.4.3 Position of second label
(POS2)
If the products are to be given two labels:
– Distance between the leading edges of the first and
second label [72A].
In the extended menu:
£ Call up the POS2 function.
£ Set the desired distance.
– Settings are possible in 0.1 mm steps:
minimum label length,
maximum 999.9 mm
– POS2 is not active if the value is set to 0.
£ Confirm the setting value using the ENTER key and
exit the function.
4.4.4 Position of third label (POS3)
If the products are to be given three labels:
– Distance between the leading edges of the second
and third label [73A].
In the extended menu:
£ Call up the POS3 function.
£ Set the desired distance.
– Settings are possible in 0.1 mm steps:
minimum label length,
maximum 999.9 mm
– POS3 is not active if the value is set to 0.
£ Confirm the setting value using the ENTER key and
exit the function.
[72] A Position of second label: Distance between the leading edges
of the first and second label
A
[73] A Position of third label: Distance between the leading edges of
the second and third label
A