Avery Dennison ALS 350 - Manual (Page 6)

6
1 P
LEASE OBSERVE THE FOLLOWING
1.1 G
ENERAL INFORMATION
ALS
350
450
1.1.1 Validity and applicability of this manual
Contents
The present manual refers exclusively to the ALS 350
and ALS 450 labeller machines. The manual is to be
referred to for correct operation and adjustment of the
machine.
The prerequisites for operation and adjustment are
proper installation and configuration of the machine.
For technical questions which are not addressed in this
operating manual:
£ Observe the instructions contained in the labeller
service guide
or
£ Request assistance from a service technician at our
sales partner.
– The customer service at our sales partner is at your
disposal and particularly helpful with configuration
settings and remedying malfunctions.
Technical State
Technical state as of: 06/2005
Software version: 6.1
Avery Dennison reserves the right to:
– implement modifications of structural parts, compo-
nents and software as well as to use equivalent
components that keep pace with the current state of
technology in lieu of the specified components.
– change information contained in this manual.
An obligation to extend these modifications to previously
delivered machines is excluded.
Copyright notice
All rights to this operating manual are assigned to Avery
Dennison. Transmission, reprinting or any other means
of reproduction of this manual, whether whole or in part,
are not allowed without prior written permission. Third
parties, in particular competitors, are not to be allowed
access to information derived from this manual.
Printed in Germany
Manufacturer
Avery Dennison Deutschland GmbH
Ohmstraße 3
D–85386 Eching
Phone: +49-8165-925-0
Fax: +49-8165-3143
http://www.machines.averydennison.com
1
P L E A S E O B S E R V E T H E F O L L O W I N G
1.1
GENERAL INFORMATION