Artesyn System Management Interface Based on HPI-B (Centellis CO 31kX-4100-2000-4410) (June 2014) - Manual (Page 70)

Using HPI-B
System Management Interface Based on HPI-B (Centellis CO31kX/4100/2000/4410) User’s Guide 70
4.4.11 Boot Bank Control
Boot Bank control is used to switch the boot bank of Motorola/Artesyn specific dual-flash-bank
boards. This control is created for all front blades, AMCs, RTMs, and Shelf Managers.
hpibootbanks
client application makes use of this control to set/get boot bank parameters.
StateUnion.Oem.BodyLen
gth
IPMI command request/response length ( max - 255 )
Ex: When we issue a 'Get Device ID' command like,
hpiipmi -d 1 -r 43 0 6 1
BodyLength would be 3 (0 6 1)
For the response, the BodyLength would be 16 bytes
StateUnion.Oem.Body
IPMI command request/response bytes
Request - all 0's
Response - ipmi command response bytes
Table 4-32 IPMI Command State (continued)
SaHpiCtrlStateT Value
Table 4-33 Boot Bank RDR
SaHpiRdrT Value
RecordId
Assigned by HPI implementation
RdrType SAHPI_CTRL_RDR
Entity
Entity path of the managing FRU which owns the control
Ex:
{ADVANCEDTCA_CHASSIS,6}{SHELF_MANAGER_SLOT,1
}{SHELF_MANAGER,1}
RdrTypeUnion
Defined in next table
IdString MOTHPI_CTRL_NAME_BOOT_BANK
Table 4-34 Boot Bank Control
SaHpiCtrlRecT Value
Num MOTHPI_CTRL_NUM_BOOT_BANK
Type SAHPI_CTRL_TYPE_OEM