Artesyn System Management Interface Based on HPI-B (Centellis CO 31kX-4100-2000-4410) (June 2014) - Manual (Page 25)

Software Installation and Configuration
System Management Interface Based on HPI-B (Centellis CO31kX/4100/2000/4410) User’s Guide 25
OPENHPID_MAX_NUMBER_OF_CONNECTIONS
maximum number of HPI
clients
<0…N> [30]
- when the client
connections reach 30, any
further connections are
rejected
30
OPENHPI_CONNECT_LOCAL_ONLY
Secure connections,
local host connection
only
“YES | NO” [NO]
– Clients can connect
from any outside host that
is reachable
YES
– Clients can connect
only through loopback
address
NO
OPENHPI_START_SNMP
Start SNMP after HPI-B
daemon discovery
“YES | NO” [YES]
– snmp is started
after HPI-B discovery
NO
– snmp is not started
NO
OPENHPI_SNMP_SCRIPT
SNMP script to run if
OPENHPI_START_SNMP
is YES
snmp
script>
[/etc/init.d/hpibsnmp]
–
default snmp script to be
executed /etc/init
.d/hpibsn
mp
OPENHPI_DAEMON_PORT
Openhpi daemon port port number [4743] - default port for HPI-B
daemon
4743
OPENHPI_LOGFILE
Path and Name of the log
file
Any valid name [/var/log/bbs-hpib] - log file
name starts with bbs-hpib Ex:
bbs-hpib00.log
/var/log/
bbs-hpib
OPENHPI_LOGFILE_MAX Sets the maximum
number of log files to be
created
<0…N> [3] - By default, 3 log files are
created
2
OPENHPI_LOGFILE_MAX_SIZE
Log file maximum size
<0…N>
[500000] - 500 KB is default
maximum size
500000
OPENHPI_LOGFLAGS
Flags that control logging
"stdout |
stderr |
file |
simplefile
| syslog |
prefix |
threadid
[file|prefix] - log into a file with
prefix( [threadid]
level> {facility}) in each line
logged
Stdout - log to standard output
Stderr - standard error
Simplefile - only one file for
logging and its name is
OPENHPI_LOGFILE
Syslog - log into syslog
Threadid - logging of threadid is
optional. With this option,
threadid is also logged
stderr
OPENHPI_LOG_ERROR_FACILITIES
Facilities that should be
logged at error level
List of facilities
mentioned in
the config file
[all]
- By default, all the
facilities are logged at error level
To mention more than one
facility, use |
Ex: core|daemon
all
Table 2-4 HPI Tags (continued)
Tag Description Allowed values Default in Config. file
Built-in
Default