Artesyn System Management Interface Based on HPI-B (Centellis CO 31kX-4100-2000-4410) (June 2014) - Manual (Page 104)

Example Applications
System Management Interface Based on HPI-B (Centellis CO31kX/4100/2000/4410) User’s Guide 104
Usage: hpiled [OPTION]...
HPI example application to control the LEDs.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-r RESOURCE_ID use resource with id RESOURCE_ID
-n CONTROL_ID use control with id CONTROL_ID for set operations
-a set control mode to auto
-1 RATE set led on duration rate in 1/100sec [0-255]
-0 RATE set led off duration rate in 1/100sec [0-255]
-t RATE led test
-V print version information and exit
-h display this help and exit
#------------------------------#
# hpilink
#------------------------------#
Usage: hpilink [OPTION]...
HPI example application to display E-Keying link states and optionally
listen
for link state events.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-r RESOURCE_ID use resource with id RESOURCE_ID
-e listen for E-Keying link state events
-V print version information and exit
-h display this help and exit
#------------------------------#
# hpilist
#------------------------------#
Usage: hpilist [OPTION]...
HPI example application to list all RPT/RDR entries and to get all events.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-D walk recursivly through DRT
-r RESOURCE_ID use resource with id RESOURCE_ID
-s output short information (do not display RDR data)
-e listen for events
-n no discover (useful for just getting events)
-i interactive mode (for development use only)