Artesyn System Management Interface Based on HPI-B (Centellis CO 31kX-4100-2000-4410) (June 2014) - Manual (Page 100)

Example Applications
System Management Interface Based on HPI-B (Centellis CO31kX/4100/2000/4410) User’s Guide 100
-s level set cooling level (only in MANUAL mode)
-V print version information and exit
-h display this help and exit
#------------------------------#
# hpifruactivation
#------------------------------#
Usage: hpifruactivation [OPTION]...
HPI example application to manage the FRU activation mode.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-D walk recursivly through DRT
-r RESOURCE_ID use resource with id RESOURCE_ID
-a {0|1} disable/enable ShM activation
-w DELAY set delay before next power on to DELAY * 1/10 sec
-V print version information and exit
-h display this help and exit
#------------------------------#
# hpifruipmcreset
#------------------------------#
Usage: hpifruipmcreset [OPTION]...
HPI example application to set FRU IPMC Reset Control actions.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-r RESOURCE_ID use resource with id RESOURCE_ID
-c IPMC cold reset
-w IPMC warm reset
-V print version information and exit
-h display this help and exit
#------------------------------#
# hpifruresetdiag
#------------------------------#
Usage: hpifruresetdiag [OPTION]...
HPI example application to set FRU Reset and Diagnostic Control actions.
Options:
-d DOMAIN_ID use domain with id DOMAIN_ID
-r RESOURCE_ID use resource with id RESOURCE_ID