AMETEK XBT Series - Manual (Page 42)

Remote Interface Protocol and Package Mode
[ state/bool] ON/1 (enable) or OFF/0 (disable) OCP
:VOLTage[n] Sets the floating point value of the DC output
voltage in volts for channel n: 1 - 3.
[ level] voltage level: 0 – 32V for ch1 and ch2, 0 – 15V
for ch3
:PROTection over voltage protection (OVP)
[?/ level] return or set the over voltage in volts
:TRIGger trigger voltage protection
[ state/bool] ON/1 (enable) or OFF/0 (disable) OVP
EXAMPLES:
How to set tracking mode:
OUT:TRACK
How to set serial output mode:
OUT:SER
OUT:SERIAL
How to set parallel output mode:
OUT:PARA
OUT:PARALLEL
How to resume normal output mode:
OUT:NORM
OUT:NORMAL
How to read back machine status:
STATUS?
How to read back machine error code:
STAT:ERR?
STATUS:ERR?
STATUS:ERROR?
5-8
M370187-01 Rev J