AMETEK XBT Series - Manual (Page 22)

Operation
3-2 M370187-01 Rev J
(1) Display:
20x4 blue backlight LCD
(2) Rotary Adjust/Enter Control:
This control has two functions:
• Rotate to adjust voltage and current.
• Press to enter any input.
(3) M:
Memory key to either store a new configuration or recall a previously stored
configuration.
• To store the current configuration, press the M key then the ►STORE
key (7). (There is enough memory to store up to 100 configurations).
• To recall any of the stored configurations, press the M key then the
◄RECALL key (8). ;
(4) CH:
Channel selection key; press to scroll to CH1, CH2 or CH3.
(5) ON/OFF:
Enables/disables the output.
(6) Number Key:
Keys labeled 0 through 9 to input value for voltage or current.
• To set voltage, use the number keys to input the desired value, then
press the “V” key (10).
• To set current, input the desired value, then press the “A” key (11).
(7) ►(STORE):
Dual function key (selecting and storing):
• When the output is on, this key moves the cursor to select the digit to be
adjusted. Once selected, adjust the digit (change the value) by turning
the rotary control (2) or press a number key.
• When in memory function (M key (3)), press this key to store the current
configuration..
(8) ◄(RECALL):
Dual function key:
• When the output is on, this key moves the cursor to the digit to be
adjusted. Once selected, adjust the digit (change the value) by either
turning the rotary control (2) or press a number key.
• When in memory function (M key (3)), press this key to recall a stored
configuration from the memory.