AMETEK XBT Series - Manual (Page 39)

Remote Interface Protocol and Package Mode
:ERRor[?] read back machine error code
:CCP[?] read back Iset DAC value
:CVP[?] read back Vset DAC value
:MONV[?] read back Vout DAC value
:MONI[?] read back Iout DAC value
PROGram program subsystem
[ state/bool] ON/1 (enable) or OFF/0 (disable) program
action
[ n] select [n] as the program number, n range from
0 ~ 99
:VSET[n] volt setting for channel n: 1 - 3
[ level] voltage level: 0 – 32V for ch1 and ch2, 0 – 15V
for ch3
:ISET[n] current setting for channel n: 1 - 3
[ level] current level: 0 – 3A for ch1 and ch2, 0 – 5A for
ch3
:TIMER return or set up timer
[?/ hh:mm:ss]
:FASTimer set up timer for fast action
[ level] unit is millisecond, range from 4~65535ms
:NEXT next step
[?] return the next program number
:END end current program
:NEXT next program number = current program
number + 1
:JUMP[ n] jump to program number n: 0 ~ 99
:SAVe save programmable 0 ~ programmable 99 value
TIMer timer subsystem
[?] return timer setting
[ ON/OFF] enable/disable timer
[ hh:mm:ss] set up timer
:TIMER? response is current timer parameter
:PAUSE stop running the timer
M370187-01 Rev J
5-5