AMETEK XBT Series - Manual (Page 37)

Remote Interface Protocol and Package Mode
-059 Cannot create timer
-060 Password error
-088 Media protected
-089 Expression Error
-100 Program error
-101 Cannot create program
-104 Program currently running
-105 Program syntax error
-106 Program runtime error
-108 Syntax error
-109 Data type error
-110 Input voltage overwrite error
-111 Input current overwrite error
5.4 SCPI Compatible Information
The SCPI commands conform to all specifications for devices as defined in
IEEE-488.2 and comply with SCPI command syntax version 1995.0. Confirmed
Commands are those commands that are approved commands in the SCPI
1995 Specification, Volume 2: Command Reference.
SCPI Common Command
Command Description
===========================================================
*CLS
Clear status (include error code)
*CAL? As same as CALi? command,return calibration parameter
*IDN? Response:, , ,
*RCL Recalls settings from memory. Memory numbers from 0 to 99 are valid.
*RST Resets the power supply to its power on state.
*SAV 1. Saves defined parameters
2. Saves current settings to memory. Memory numbers from 0 to 99
are valid.
*WAI Sets the device to wait until all previous commands and queries are
M370187-01 Rev J
5-3