AMETEK XBT Series - Manual (Page 35)

5.
REMOTE INTERFACE PROTOCOL
AND PACKAGE MODE
This section presents communication protocol, which includes SCPI instructions
and low-error protocol.
5.1 Introduction
SCPI compliant commands allow remote operation, control and monitoring of the
power supply by connecting to a personal computer (PC) via USB, IEEE-488.2
or RS-232 interface.
5.2 Definition of Parameters
Type Valid arguments
ON or 1 / OFF or 0
The data format is defined in IEEE-488.2 for integers. Zero,
positive and negative integer numeric values are valid data.
The data format is defined in IEEE-488.2 for flexible numeric
representation. Zero, positive and negative floating point numeric
values are valid data.
Characters are enclosed by single or double quotes.
New line, hex code is 0x0Ah
Return, hex code is 0x0Dh
end or identify
M370187-01
Rev J
5-1