AMETEK XBT Series User Manual

Page 26

Text mode
Original mode

Operation

3-6

M370187-01 Rev J

6. Interface: Transmission interface. Select RS232, USB, GPIB

(XBT32-3FTP optional), LAN Port (XBT32-3FTP optional) by
using rotary.

• RS-232 Setup Parameters:

Parity none
Data Bits I
Stop Bits 1

• DB9 Connector Definition

Pin 2 TX
Pin 3 RX
Pin 5 Ground

7. DHCP: This parameter is for LAN port setting. The default is Off. Press

the rotary to toggle between ON or OFF. In DHCP "On" mode, a
dynamic IP address can be obtained from the server. In DHCP
“Off” mode, a static IP address can be set in the IP parameter.