AMETEK XBT Series - Manual (Page 27)

2BOperation
8. IP 170.85.170: This parameter is for LAN port setting. (Default LAN
configuration is: static, IP address 0.0.0.0, subnet mask
255.255.255.0). Set a static IP address with DHCP “Off.”
Use the ◄►keypads to position the cursor at each value
in the IP address; use the number keypads to input the
desired IP address.
9. BEEP: Audible signal. Press rotary to switch the audible signal on or off.
10. Key lock: Key lock function. Disables key pad to avoid accidental inputs or
changes. The initial value is OFF. Press rotary to enable key lock
function. Rotary + CLEAR to clear key lock and resume normal
use of the key pads.
11. Parallel out: Parallel output. The initial value is OFF. Press rotary to
M370187-01 Rev J
3-7