beautypg.com

2 mechanical specifications – AMETEK DCS-E 3kW Series User Manual

Page 21

background image

Sorensen DCS-E Series 3kW Supplies

Introduction

M362295-01 Rev C

1-3

A

DDITIONAL

C

HARACTERISTICS

Models

DCS8-350E DCS12-250E DCS20-150E DCS40-75E DCS55-55E DCS60-50E DCS80-37E DCS150-20E

Stability

4

Voltage
Current


4 mV
175 mA


6 mV
125 mA


10 mV
75 mA


20 mV
37.5 mA


27.5 mV
27.5 mA


30 mV
25 mA


40 mV
18.5 mA


75 mV
10 mA

Temperature
Coefficient

5

Voltage
Current



1.6 mV/°C
105 mA/°C



2.4 mV/°C
75 mA/°C



4 mV/°C
45 mA/°C


8 mV/°C
22.5 mA/°C



11 mV/°C
16.5 mA/°C



12 mV/°C
15 mA/°C



16 mV/°C
11.1 mA/°C



30 mV/°C
6.0 mA/°C

Maximum
Remote Sense
Line Drop
Compensation

1V/line

1V/line

1V/line

1V/line

1V/line

1V/line

1V/line

1V/line

4

Maximum drift over 8 hours with constant line, load, and temperature, after 90–minute warmup.

5

Change in input per °C change in ambient temperature with constant and load.

Operating Ambient Temperature:
0 - 50°C No derating. From 50 - 70°C, derate output 2% per °C

Storage Temperature Range: -55 to +85°C

Humidity Range: 0 - 80 % Non-condensing

Time Delay from power on until output stable: 5 seconds maximum

Switching Frequency: Nominal 30 kHz (60 kHz output ripple)

Voltage Mode Transient Response Time:
1 mS recovery to 1% band for 30% step load change from 70% to 100% or 100% to 70%

Remote Start/Stop and Interlock:
TTL Compatible Input, Contact Closure, 12 – 250 Vac or 12 – 130 Vdc

Remote Analog Programming (Full Scale Input)

Parameter Resistance

Voltage

Current

Voltage

0 - 5k

0 - 5V, 0 - 10V

0 - 1 mA

Current

0 - 5k

0 - 5V, 0 - 10V

0 - 1 mA

OVP

0 - 5V, 0 - 10V

1.3.2 Mechanical

Specifications

Size: 87.6 mm H x 482.6 mm W x 508 mm D (3.45 in H x 19 in W x 20 in D)

Weight: 16 kg (35 lbs) (approx.)

Output Connector:
Nickel-plated copper bus bars: 2.25" x 1.0" x 0.125" (2.25" x 1.0" x 0.25" for 8V & 12V models)

Bus bar load wiring mounting holes:

One 0.332" diameter hole;

1

/

4

" hardware (

5

/

16

" hardware for 8V and 12V models)

Two 0.190" diameter holes on 0.5" centers; #10 hardware

Input Connector:
Chassis-Mounted Part: Housing Tyco 641685-1; Contact pins Tyco 350821-1
Mating Connector Parts: Housing Tyco 643267-1; Contact pins Tyco 350821-1