KBC Networks Mesh2HT - Manual (Page 9)

Mesh2HT User Manual
Manual-MESH2HT-Rev1311
Copyright © KBC Networks 2012
Page 9 of 59 www.kbcnetworks.com
Environmental Restrictions of Wireless Devices
KBC products are engineered to the highest standards and designed to work in a variety
of wireless applications and environments. A wireless environment includes the site in
which the product is installed, the installation including power and cabling as well as any
extra materials that might be necessary to complete the wireless project. Due to the fact
that environments and installations differ from site to site, KBC cannot control the
variables required to ensure an ideal environment. Therefore, it is not possible to
guarantee a successful application based on a drawing, application note, distance
calculation, quote or other type of material that KBC may provide. Should a quote,
drawing, etc. be made available, it is based on the performance of the Mesh2HT product
in an ideal environment with clear line-of-sight, absence of interference and/or frequency
multi-path reflection. Therefore, KBC cannot be held responsible should the products not
operate as desired or should additional products be required to complete a project. In
addition, should a particular environment restrict the usage of the Mesh2HT in any way,
KBC offers a thirty (30) day return policy from date of shipment to the original purchaser
if goods are returned in an ‘as new’ condition.
RoHS / WEEE Compliance Statement
European Directive 2002/96/EC requires that the equipment bearing this symbol on the
product and/or its packaging must not be disposed of with unsorted municipal waste.
The symbol indicates that this product should be disposed of separately from regular
household waste streams. It is your responsibility to dispose of this and other electric
and electronic equipment via designated collection facilities appointed by the
government or local authorities. Correct disposal and recycling will help prevent potential
negative consequences to the environment and human health. For more detailed
information about the disposal of your old equipment, please contact your local
authorities, waste disposal service, or the shop where you purchased the product.
Instruction of Disassembly
Instruction of Disassembly of KBC Product (For EU Directive 2002/95/EEC-
WEEE)
Tools required:
• No. 1 Phillips screwdriver
• No. 2 Phillips screwdriver
Steps for disassembly:
1.
Remove Serial Label adhesive
2. Remove cover screws attaching top cover to radio module cavity.
3. Remove tightening screws for printed circuit board (PCB).
4. Take out all PCBs.
Note: When a product reaches the end of its life – return to KBC.