KBC Networks Mesh2HT User Manual
Page 41
Mesh2HT User Manual
Manual-MESH2HT-Rev1311
Copyright © KBC Networks 2012
Page 41 of 59
www.kbcnetworks.com
3.2.4 Topology
The system mapping capability of the topology page enables end users to view system
configuration and health all on one page. Mesh2HT topology shows the links between
different station/clients and host/APs. System mapping supports dynamic changes in the
network so as the network changes it learns the new topology and updates this on the
topology webpage. In order to show an actual mapping topology, one network device
that is able to reply Ping (or a Mesh2HT unit), shall be configured with IP address
192.168.1.1
Along with system mapping, the topology view also displays all node information; this
can be viewed by holding your mouse over a particular node and radio. Node hover over
will display following node information:
•
Node IP address
•
Bridge MAC address
•
Root bridge information
•
Gateway information
•
Radio up/down status
•
Radio host/client role
•
Connected peer information