KBC Networks Mesh2HT User Manual

Page 53

Text mode
Original mode

Mesh2HT User Manual

Manual-MESH2HT-Rev1311
Copyright © KBC Networks 2012

Page 53 of 59

www.kbcnetworks.com

for wireless link lengths exceeding 1.6km/1mile and also to alter the value of the signal
strengths of the RSSI LEDs located on the back of the Mesh2HT units.

3.2.7.1

ADVANCED WIRELESS: LONG RANGE PARAMETERS

I tis recommended that for all links over 1.6km/1mile the long range parameters must
be set. In the example below, the Mesh2HT unit is configured for a 1600m/1 mile
connection. Both host/AP and client units must be configured for the distance
parameters:

This manual is related to the following products:

MeshII