KBC Networks MeshII - Manual

Introduction
Welcome to KBC Networks’ Quick Start Guide for
the MESHII dual radio, Host & Client unit with
5dBi antennas. This document provides some
quick tips on how to get up and running. For
more detailed information see the Downloads
section below.
Features:
• 5GHz operation
• MIMO technology
• Supports IEEE 802.3af
• Dynamic Frequency Selection
• Transmission Power Control
• Antenna alignment & signal survey tools
• Weatherproof casing
Downloads
Installation manual
Other features and functions are described in the
unabridged manual:
http://www.kbcnetworks.com/meshii/wireless-
products/meshii
Specification Sheets:
http://www.kbcnetworks.com/meshii/wireless-
products/meshii
Release Notes:
http://www.kbcnetworks.com/specification-
downloads/technical-release-notes
System Contents
Qty Description
1 MESHII RF Module
4 5dBi omni-directional dipole antennas
1 PoE compliant power injector module
1 24VDC 500mA PSU
1 Weather/cable strain relief kit assembly
1 Wall or pole mount bracket and assembly
kit each including:
1 Pole/wall mount bracket
1 Left/right swivel bracket
1 Up/down swivel bracket & MESHII
mounting plate
1 U bolt
1 Mast clamp
1 2” Phillips hex head bolt
1 1.5” hex head bolt
4 Flat washers
4 Hex nuts
5 Lock washers
Note: Please purchase directional antennas
separately.
Equipment Required for Physical
Deployment
You will need 2 straight-through Ethernet cables:
KBC recommends shielded outdoor rated
Ethernet cables when connecting near power
outlets and when exposed to the elements.
Client - Radio 1 (R1) (default)
Host/AP - Radio 2 (R2) (default)
Quick Start Guide
MESH-AA-O*
5dBi Dual Radio MESHII Dual Radio Wireless
Ethernet System
QSG_MeshII-AA-O_Rev1209 www.kbcnetworks.com
Copyright © KBC Networks Ltd. 2012