KBC Networks Mesh2HT User Manual
Page 28
Mesh2HT User Manual
Manual-MESH2HT-Rev1311
Copyright © KBC Networks 2012
Page 28 of 59
www.kbcnetworks.com
The individual sections and description are:
3.2.1.2
Status: Main
The ‘MAIN’ screen shows the Uptime, the host name and System Time information.
Uptime:
This shows the number of hours and minutes since the last reboot or when
the system was initially powered up.
Host Name: This displays the chosen name of the device as set in the ‘SYSTEM’ menu.
3.2.1.3
Status: VERSION
The ‘Version’ screen shows the firmware version information.
Firmware Version: This is the firmware version on the Mesh2HT unit.
3.2.1.4
Status: LAN SETTING
The ‘LAN Setting screen shows the LAN MAC, Mode, IP Address, Gateway IP Address and
LAN cable information. These are set in the ‘NETWORK: Basic Network’ menu option.
LAN MAC: this is the unit’s own MAC address for the Ethernet LAN side of the device.
There are three MAC address per Mesh2HT unit; the radios also have their own MAC
addresses, these can be found under the Radio 1 and Radio 2 tabs.