KBC Networks Mesh2HT - Manual (Page 47)

Mesh2HT User Manual
Manual-MESH2HT-Rev1311
Copyright © KBC Networks 2012
Page 47 of 59 www.kbcnetworks.com
3.2.5.3 Basic Network: Bandwidth Control
The Mesh2HT system can control throughput into the LAN port to the radio as well as out
of the radio to the LAN port based on desired throughput configurations. Default setting
is 1 Mbps for each selection.
3.2.6 BASIC WIRELESS: Radio 1 & Radio 2
Channel frequency selection and bandwidth options are set within the Basic Wireless
menu option. The host/AP will connect to a client provided that the SSID, MAC Lock (if
applicable) and Country Code settings are the same.
3.2.6.1 BASIC WIRELESS SETTINGS
This menu option shows the default settings.
The default setting Radio 1 is a client/station.