KBC Networks Mesh2HT - Manual (Page 4)

Mesh2HT User Manual
Manual-MESH2HT-Rev1311
Copyright © KBC Networks 2012
Page 4 of 59 www.kbcnetworks.com
Safety Warnings
!Warning! For your safety please read the following warning notices and
instructions.
Safety, Approvals and Regulatory Domain
Information
Safety Instruction
For your protection, please read and observe all safety instructions before operating this
system and keep this sheet and any additional instructions for future reference.
Installation and Use
OBSERVE WARNINGS: All warnings in the operating instructions should be carefully
followed. Do not make any modifications to the Mesh2HT unit, Power Injection Module
(PIM), or any other KBC Networks electronic device, as the unit(s) will no longer comply
with legal regulations and therefore void its warranty.
WATER AND MOISTURE: The Mesh2HT unit is weatherproof provided it is installed in
accordance to the mounting details listed in section 2.4.3. However, further protection
or housing is suggested for harsh environments, as moisture damage voids its warranty.
The PIMs used in this system are NOT weatherproof. None of the modules in this
system are waterproof and should never be submerged. Severe electrical shock,
personal injury or damage to the equipment may result.
POWER SOURCE: Connect the equipment to a power source only of the type
described on the operating instructions or as marked on the equipment. Excessive or
insufficient current or voltage can cause extended trouble-shooting or even damage
that could negate its warranty. The power supply cable should not be modified/extended
due to the ability to use up to 100m of power over Ethernet cable. In addition, Ethernet
cable running from the PIM to the WEM should be kept separated from high-voltage
cables and/or transformers.
ATTACHMENTS: Use only KBC Networks’ supplied or recommended Power Injection
Modules, Power Supplies, Cat5 Cables and weather seals and plugs.
WHEN NOT IN USE: Unplug the power if the equipment is left unattended or unused
for long periods of time or during lightning storms.
REPLACEMENT PARTS: When replacement parts are required, use only replacement
parts specified by KBC Networks. Unauthorized substitutions may result in damage to
the system and could void the warranty.