beautypg.com

Devicenet remote i/o communication module rtu-dnet – Delta Electronics RTU-DNET User Manual

Page 26

background image

DeviceNet Remote I/O Communication Module RTU-DNET

DVP-PLC Application Manual

24

(6) Click on “OK”, and

DeviceNetBuilder will start to scan the entire network.

(7) If the bar on the dialog box does not progress, it means the connection between the PC and DVP-SVis

abnormal, or there are other programs also usinig the COM port on the PC. After the scan is completed,

the dialog box will tell you that the scan is completed, and the icons and device names of all the nodes

scanned on the network will be shown on the screen. See the figure below, in which the node address of

DVPDNET-SL is 01.

(8) Double click on RTU-DNET (node 02), and the “Node Configuration…dialog box will appear.