Delta Electronics RTU-DNET - Manual (Page 17)

DeviceNet Remote I/O Communication Module RTU-DNET
DVP-PLC Application Manual 15
bit Status value Explanation
2 0/1 Reserved
3 0/1 Reserved
4 0/1 Reserved
5 0/1 Reserved
6 0/1 Reserved
7 0/1 Reserved
8 0/1 Reserved
9 0/1 Reserved
10 0/1 Reserved
11 0/1 Reserved
12 0/1 Reserved
13 0/1 Reserved
14 0/1 Reserved
0 Disabling control word
15
1 Enabling control word
„ Status word
bit Status value Explanation
0 RTU-DNET detects DI/DO extension unit.
0
1 RTU-DNET does not detect DI/DO extension unit.
0
The configurations of RTU-DNET and the extension unit connected to
it are consistent.
1
1
The configrations of RTU-DNET and the extension unit connected to it
are inconsistent.
0 No error occurs in the special module.
2
1 Error occurs in the special module.
0 The special module operates normally.
3
1 The special module is detected offline.
0 The configuration data are valid.
4
1 The configuration data are invalid.
0 RTU-DNET operates normally.
5
1 The power of RTU-DNET is in low voltage.
0 RTU-DNET operates normally.
6
1 RTU-DNET detects unidentifiable special module.
0 RTU-DNET operates normally.
7
1
More than 8 special modules connected to RTU-DNET, or the number
of digital I/O points exceeds 128.
8 0/1 Reserved
9 0/1 Reserved
10 0/1 Reserved
11 0/1 Reserved
12 0/1 Reserved
13 0/1 Reserved