Altera Parallel Flash Loader IP - Manual (Page 4)

Manufacturer Product Family Data Width Density (Megabit) Device Name (1)(2)
G18 16
512 MT28GU512AAA1E
GC-0SIT
1024 MT28GU01GAAA1E
GC-0SIT
M58BW
32
16
M58BW16FT
M58BW16FB
32 M58BW32FT
16 or 32 32 M58BW32FB
Spansion
GL-P (3) 8 or 16
128 S29GL128P
256 S29GL256P
512 S29GL512P
1024 S29GL01GP
AL-D 8 or 16
16 S29AL016D
32 S29AL032D
AL-J 8 or 16 16 S29AL016J
AL-M 8 or 16 16 S29AL016M
JL-H 8 or 16
32 S29JL032H
64 S29JL064H
WS-N 16 128 S29WS128N
GL-S 16
128 S29GL128S
256 S29GL256S
512 S29GL512S
1024 S29GL01GS
Macronix
MX29LV 16
16 MX29LV160D
32 MX29LV320D
64
MX29LV640D
MX29LV640E
MX29GL 16
128 MX29GL128E
256 MX29GL256E
(1) Spansion has discontinued the Spansion S29GL-N flash memory device family. Altera does not recommend
using this flash memory device. For more information about an alternative recommendation, see related
information.
(2) The PFL IP core supports top and bottom boot block of the flash memory devices. For Micron flash memory
devices, the PFL IP core supports top, bottom, and symmetrical blocks of flash memory devices.
(3) Supports page mode.
4 Supported Flash Memory Devices
UG-01082
2015.01.23
Altera Corporation Parallel Flash Loader IP Core User Guide
Send Feedback