Pilz PSSu K F FCU - Manual (Page 7)

Overview
Operating Manual PSSu K F FCU
1002391-EN-04
7
Overview
Module structure
The module combines the function unit (inputs or outputs) and connection levels in one
housing.
Wiring is via 10-pin connectors with spring-loaded terminals, which are plugged into the
connector strips on the module.
Details of the applicable connectors with spring-loaded terminals are available in the chap-
ter entitled "Intended Use".
Module features
} For failsafe applications in system environment B (automation system PSS 4000)
} 12 Digital inputs, 8 of which are for fast shutdown
} Filter time can be configured separately for inputs with and without fast shutdown
} 2 Independent test pulse outputs that use different test pulses
} 2 Digital outputs
– Semiconductor technology
– Single-pole
– Positive-switching
– Current load capacity per output: 2,00 A
– Short circuit-proof
– Overload-proof
– Free from feedback
} 2 Dual-pole digital outputs
– Semiconductor technology
– Switches to 24 V (Ox+) and 0 V (Ox-)
– Current load capacity: 3,0 A
– Short circuit-proof
– Overload-proof
– High discharge voltage
– Free from feedback
} LEDs for:
– Switch status of each input/output
– Module error
– Module status
} 4 x 10-pin connector strip
Accessories:
} Connector with spring-loaded terminals (necessary for operation)
} Labelling bracket
2
2.1
2.1.1