Pilz PSSu K F FCU - Manual (Page 37)

Technical details
Operating Manual PSSu K F FCU
1002391-EN-04
37
Inputs 312435
Number 12
Input current range 2,5 - 7,5 mA
Min. threshold voltage when signal changes from "1"
to "0" 9,0 V
Max. threshold voltage when signal changes from "0"
to "1" 10,0 V
Max. processing time of input when signal changes
from "1" to "0" (depending on the configured input fil-
ter time) 2,700 - 5,800 ms
Max. processing time of input when signal changes
from "0" to "1" (depending on the configured input fil-
ter time) 2,700 - 5,800 ms
Potential isolation between input and voltage for the
internal module bus Yes
Test pulse outputs 312435
Number of test pulse outputs 2
Voltage, test pulse outputs 24 V DC
Short circuit-proof Yes
Number of outputs that can be configured as test
pulses 2
Max. output current at "1" signal 0,25 A
Max. cable runs between test pulse output and input 200 m
Standard for voltage interruptions DIN V EN V 1954, EN61131-2, EN61496-1
Semiconductor outputs 312435
Number of positive-switching single-pole semicon-
ductor outputs 2
Voltage 24,0 V
Typ. output current at “1” signal and rated voltage of
semiconductor output 2,00 A
Permitted current range 0,00 - 2,50 A
Residual current at "0" signal 0,02 A
Max. transient pulsed current 6 A
Max. internal voltage drop 100 mV
Monitoring threshold of semiconductor output 9,0 V
Max. duration of on time during self test 200 µs
Max. duration of off time during self test 200 µs
Max. processing time of semiconductor output when
signal changes from "1" to "0" 0,250 ms
Max. processing time of semiconductor output when
signal changes from "0" to "1" 0,450 ms
Potential isolation from system voltage Yes
Potential isolation between semiconductor output and
input Yes
Short circuit-proof Yes
Permitted loads Inductive, capacitive, resistive
Semiconductor outputs, 2-pole 312435
Number of dual-pole semiconductor outputs 2
Permitted current range 0,00 - 3,50 A