Pilz PSSu H PLC1 FS SN SD - Manual (Page 29)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-1
5.1 Run in a graphics software package or browser
5 Run PSS 4000 Diag Control
5 5000 Run PSS 4000 Diag Control Run PSS 4000 Diag Control 5- 5.1 Run in a graphics software package or browser 5100 Run in a graphics software package or browser 5- 5.1.1 Run in a graphics software package
Run in a graphics software package 5- PSS4000 Diag Control ausführen Visualisierungssoftware
Prerequisite:
 PSS 4000 Diag Control must be installed on the PC or PMI (see chap-
ter entitled "Install PSS 4000 Diag Control").
 PSS 4000 Diag Control must be configured in the graphics software
(see chapter entitled "Configuration in a graphics software package").
Procedure:
 Details of how to incorporate PSS 4000 Diag Control into your graph-
ics software are provided in the description or in the graphics soft-
ware's online help.
5.1.2 Run in a browser
Run in a browser 5-
5.1.2.1 Run PSS 4000 Diag Control in a browser on a PC
Run PSS 4000 Diag Control in a browser on a PC 5- PSS4000 Diag Control im Browser (PC) ausführen
Prerequisite:
 PSS 4000 Diag Control must be installed on the PC (see chapter en-
titled "Install PSS 4000 Diag Control").
 The HTML file must be configured (see chapter entitled "Configura-
tion in a browser").
 An ActiveX-enabled browser must be installed on the PC.
Procedure:
 Start the configured HTML file in an ActiveX-enabled browser.