Pilz PSSu H PLC1 FS SN SD - Manual (Page 21)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-9
4.2 Configuration in a browser
4 Configure PSS 4000 Diag Control
4.2 Configuration in a browser 4200 Configuration in a browser 4- PSS4000 Diag Control HTML
The section below describes how to configure PSS 4000 Diag Control in
an ActiveX-enabled browser. Configuration requires some knowledge of
the HTML markup language.
The Appendix contains examples that you can use to create your own
HTML file.
General browser display settings:

Switches off Internet Explorer's vertical scroll bar.
 WIDTH=a; HEIGHT=b
Size of the window in which the PSS 4000 Diag Control is displayed,
in pixels.
 style="margin-left:-2px; margin-top:-2px;"
Aligned left, -2 pixels from left margin and -2 pixels from top margin
for better presentation
 CLASSID="CLSID:CE42D3A2-5C9C-4A77-B7DF-08A27AAC7BC5"
Class-ID used to reference the PSS 4000 Diag Control.
4.2.1 General properties
General properties 4- PSS4000 Diag Control Allgemeine Properties konfigurieren
General properties of PSS 4000 Diag Control:
 "OPCServer"
The IP address or logical name of the PSS 4000 OPC Server. "local-
host" is the valid logical name when the PSS 4000 OPC Server and
PSS 4000 Diag Control are on the same computer.
 "Language"
To display the diagnostic texts in the required language, enter the
LCID for the relevant language.
– Values:
– English: "1033"
– German: "1031"
 "Display"
Window format
– Values:
– "SingleWindow"
– "SplitWindow"
 "QVGA"
Screen output optimised for QVGA format
– "0" = not activated
– "1" = activated (only when Single Window is selected)