Pilz PSSu H PLC1 FS SN SD - Manual (Page 17)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-5
4.1 Configuration in a graphics software package
4 Configure PSS 4000 Diag Control
4.1.3 Split Window 2/2 tab
Split Window 2/2 tab 4- PSS 4000 Diag Control Split 2_2
On the Split Window 2/2 tab you can select the fields that are to be dis-
played. These settings will apply if you selected Split Window under
Display:
 Columns for diagnostic messages
Select the fields that will be displayed in the diagnostic messages
window, plus their position and width within the table.
 Columns for remedies
Select the fields that will be displayed in the remedies window, plus
their position and width within the table.