Pilz PSSu H PLC1 FS SN SD - Manual (Page 13)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-1
4.1 Configuration in a graphics software package
4 Configure PSS 4000 Diag Control
4 4000 Configure PSS 4000 Diag Control Configure PSS 4000 Diag Control 4- 4.1 Configuration in a graphics software package 4100 Configuration in a graphics software package 4- PSS 4000 Diag Control Einfüh.Konfiguration in Visu
The section below describes how to configure PSS 4000 Diag Control in
a graphics software package.
Prerequisite:
 PSS 4000 Diag Control must be installed on your computer (see sec-
tion entitled "Installation on a PC").
 PSS 4000 Diag Control must be incorporated into your graphics soft-
ware.
Details of how to use PSS 4000 Diag Control in your graphics software
are provided in the description or in the graphics software's online help.
A detailed description of the graphics software PMI-PRO (open) is avail-
able in the manual "PMI-PRO (open) – ActiveX Elements".