Crank case breather and pcv installation – Vortech 2005-2010 Ford 4.6L 3v Mustang GT User Manual

Page 72

P/N: 4FU020-010 v6.2, 06-08-10

Fig. 12-a

Fig. 12-c

12. CRANK CASE BREATHER AND PCV INSTALLATION

Locate PVC/MAF assembly 4FU139-096.

Install the hose assembly between the driver’s

side valve cover and the intake manifold. Secure

hose connections as necessary using the supplied

stepless clamps.

(See Figs. 12-a, 12-b for assistance.)

Locate the factory 3/8" x 90° fitting removed from

the passenger’s side valve cover in a previous

step.

Connect the remainder of the supplied 3/8"ID

hose to the 90° fitting and connect to the passen-

ger’s side valve cover. (See Fig. 12-c.)

Route the open end of the 3/8" hose behind the

alternator and across to where the air inlet duct

will be located.

FACTORY 90° HOSE

CONNECTOR

CONNECTION ON

PASSENGER’S SIDE

Fig. 12-b

FACTORY 90° HOSE

CONNECTOR

SUPPLIED PCV

VALVE

3/8" TO 5/8"

UNION